Créer et enregistrer des hachures personnalisées

[nen]

Bonjour,

Je me permets de vous solliciter au sujet d'un lisp que j'ai trouvé.

 

En effet le lisp ci-dessous sert à faire des hachures personnalisées malheureusement il ne fonctionne pas et je suppose que ce sont les commandes qui ne sont pas en français, mais en anglais.

 

Un généreux lipien aurait-il l'amabilité de regarder s'il arrive à faire quelques choses ?

 

 

Merci d'avance

Meilleures salutations

 

 

;;;CADALYST 10/05 Tip 2065: HatchMaker.lsp	Hatch Maker	(c) 2005 Larry Schiele

;;;* ======   B E G I N   C O D E   N O W    ======   
;;;* HatchMaker.lsp written by Lanny Schiele at TMI Systems Design Corporation
;;;* Lanny.Schiele@tmisystems.com
;;;* Tested on AutoCAD 2002 & 2006. -- does include a 'VL' function -- should work on Acad2000 on up.

(defun C:DrawHatch (/)
 (command "undo" "be")
 (setq os (getvar "OSMODE"))
 (setvar "OSMODE" 0)
 (command "UCS" "w")
 (command "PLINE" "0,0" "0,1" "1,1" "1,0" "c")
 (command "zoom" "c" "0.5,0.5" 1.1)
 (setvar "OSMODE" os)
 (setvar "SNAPMODE" 1)
 (setvar "SNAPUNIT" (list 0.01 0.01))
 (command "undo" "e")
 (alert
   "Draw pattern within 1x1 box using LINE or POINT entities only..."
 )
 (princ)
)

(defun C:SaveHatch (/      round    dxf      ListToFile
     user     SelSet   SelSetSize ssNth
     Ent      EntInfo  EntType  pt1 pt2
     Dist     AngTo    AngFrom  XDir YDir
     Gap      DeltaX   DeltaY   AngZone Counter
     Ratio    Factor   HatchName  HatchDescr
     FileLines       FileLines  FileName
     Scaler   ScaledX  ScaledY  RF x
     y      h       _AB      _BC _AC
     _AD      _DE      _EF      _EH _FH
     DimZin
    )
;;;* BEGIN NESTED FUNCTIONS

 (defun round (num)
   (if (>= (- num (fix num)) 0.5)
     (fix (1+ num))
     (fix num)
   )
 )

 (defun dxf (code EnameOrElist / VarType)
   (setq VarType (type EnameOrElist))
   (if (= VarType (read "ENAME"))
     (cdr (assoc code (entget EnameOrElist)))
     (cdr (assoc code EnameOrElist))
   )
 )


 (defun ListToFile (TextList    FileName  DoOpenWithNotepad
      AsAppend    /   TextItem
      File    RetVal
     )
   (if (setq File (open FileName
   (if AsAppend
     "a"
     "w"
   )
    )
)
     (progn
(foreach TextItem TextList
  (write-line TextItem File)
)
(setq File (close File))
(if DoOpenWithNotepad
  (startapp "notepad" FileName)
)
     )
   )
   (FindFile FileName)
 )

;;;* END NESTED FUNCTIONS
 
 (princ
   (strcat
     "\n."
     "\n    0,1 ----------- 1,1"
     "\n     |               | "
     "\n     |  Lines and    | "
     "\n     |  points must  | "
     "\n     |  be snapped   | "
     "\n     |  to nearest   | "
     "\n     |  0.01         | "
     "\n     |               | "
     "\n    0,0 ----------- 1,0"
     "\n."
     "\nNote:  Lines must be drawn within 0,0 to 1,1 and lie on a 0.01 grid."
    )
 )
 (textscr)
 (getstring "\nHit [ENTER] to continue...")

 (princ
   "\nSelect 1x1 pattern of lines and/or points for new hatch pattern..."
 )
 (while (not (setq SelSet (ssget (list (cons 0 "LINE,POINT")))))
 )
 (setq ssNth    0
SelSetSize (sslength SelSet)
DimZin    (getvar "DIMZIN")
 )
 (setvar "DIMZIN" 11)
 (if (> SelSetSize 0)
   (princ "\nAnalyaing entities...")
 )
 (while (< ssNth SelSetSize)
   (setq Ent   (ssname SelSet ssNth)
  EntInfo (entget Ent)
  EntType (dxf 0 EntInfo)
  ssNth   (+ ssNth 1)
   )
   (cond
     ((= EntType "POINT")
      (setq pt1      (dxf 10 EntInfo)
     FileLine (strcat "0,"
        (rtos (car pt1) 2 6)
        ","
        (rtos (cadr pt1) 2 6)
        ",0,1,0,-1"
       )
      )
      (princ (strcat "\n" FileLine))
      (setq FileLines (cons FileLine FileLines))
     )
     ((= EntType "LINE")
      (setq pt1     (dxf 10 EntInfo)
     pt2     (dxf 11 EntInfo)
     Dist    (distance pt1 pt2)
     AngTo   (angle pt1 pt2)
     AngFrom (angle pt2 pt1)
     IsValid nil
      )
      (if
 (or (equal (car pt1) (car pt2) 0.0001)
     (equal (cadr pt1) (cadr pt2) 0.0001)
 )
  (setq DeltaX 0
 DeltaY 1
 Gap (- Dist 1)
 IsValid T
  )
  (progn
    (setq Ang   (if (< AngTo pi)
      AngTo
      AngFrom
    )
   AngZone (fix (/ Ang (/ pi 4)))
   XDir   (abs (- (car pt2) (car pt1)))
   YDir   (abs (- (cadr pt2) (cadr pt1)))
   Factor  1
   RF   1
    )
    (cond
      ((= AngZone 0)
       (setq DeltaY (abs (sin Ang))
      DeltaX (abs (- (abs (/ 1.0 (sin Ang))) (abs (cos Ang)))
      )
       )
      )
      ((= AngZone 1)
       (setq DeltaY (abs (cos Ang))
      DeltaX (abs (sin Ang))
       )
      )
      ((= AngZone 2)
       (setq DeltaY (abs (cos Ang))
      DeltaX (abs (- (abs (/ 1.0 (cos Ang))) (abs (sin Ang)))
      )
       )
      )
      ((= AngZone 3)
       (setq DeltaY (abs (sin Ang))
      DeltaX (abs (cos Ang))
       )
      )
    )
    (if (not (equal XDir YDir 0.001))
      (progn
 (setq Ratio  (if (< XDir YDir)
         (/ YDir XDir)
         (/ XDir YDir)
       )
       RF     (* Ratio Factor)
       Scaler (/ 1
   (if (< XDir YDir)
     XDir
     YDir
   )
       )
 )
 (if (not (equal Ratio (round Ratio) 0.001))
   (progn
     (while
       (and
  (<= Factor 100)
  (not (equal RF (round RF) 0.001))
       )
        (setq Factor (+ Factor 1)
       RF     (* Ratio Factor)
        )
     )
     (if (and (> Factor 1) (<= Factor 100))
       (progn
  (setq _AB (* XDir Scaler Factor)
        _BC (* YDir Scaler Factor)
        _AC (sqrt (+ (* _AB _AB) (* _BC _BC)))
        _EF 1
        x   1
  )
  (while (< x (- _AB 0.5))
    (setq y (* x (/ YDir XDir))
   h (if (< Ang (/ pi 2))
       (- (+ 1 (fix y)) y)
       (- y (fix y))
     )
    )
    (if (< h _EF)
      (setq _AD x
     _DE y
     _AE (sqrt (+ (* x x) (* y y)))
     _EF h
      )
    )
    (setq x (+ x 1))
  )
  (if (< _EF 1)
    (setq _EH (/ (* _BC _EF) _AC)
   _FH (/ (* _AB _EF) _AC)
   DeltaX (+ _AE
       (if (> Ang (/ pi 2))
         (- _EH)
         _EH
       )
    )
   DeltaY (+ _FH)
   Gap (- Dist _AC)
   IsValid T
    )
  )
       )
     )
   )
 )
      )
    )
    (if (= Factor 1)
      (setq Gap     (- Dist (abs (* Factor (/ 1 DeltaY))))
     IsValid T
      )
    )
  )
      )
      (if
 IsValid
  (progn
    (setq FileLine
    (strcat
      (angtos AngTo 0 6)
      ","
      (rtos (car pt1) 2 8)
      ","
      (rtos (cadr pt1) 2 8)
      ","
      (rtos DeltaX 2 8)
      ","
      (rtos DeltaY 2 8)
      ","
      (rtos Dist 2 8)
      ","
      (rtos Gap 2 8)
    )
    )
    (princ (strcat "\n" FileLine))
    (setq FileLines (cons FileLine FileLines))
  )
  (princ (strcat "\n * * *  Line with invalid angle "
   (angtos AngTo 0 6)
   (chr 186)
   " omitted.  * * *"
  )
  )
      )
     )
     ((princ
 (strcat "\n * * *  Invalid entity " EntType " omitted.")
      )
     )
   )
 )
 (setvar "DIMZIN" DimZin)
 (if
   (and
     FileLines
     (setq HatchDescr
     (getstring T
  "\nBriefly describe this hatch pattern: "
     )
     )
     (setq FileName (getfiled "Hatch Pattern File"
         "I:\\Acad\\Hatch\\"
         "pat"
         1
      )
     )
   )
    (progn
      (if (= HatchDescr "")
 (setq HatchDescr "Custom hatch pattern")
      )
      (setq HatchName (vl-filename-base FileName)
     FileLines (cons (strcat "*" HatchName "," HatchDescr)
       (reverse FileLines)
        )
      )
      (princ
 "\n============================================================"
      )
      (princ
 (strcat "\nPlease wait while the hatch file is created...\n"
 )
      )
      (ListToFile FileLines FileName nil nil)
      (command "delay" 1500)  ;delay required so file can be created and found (silly, but req.)
      (if (findfile FileName)
 (progn
   (setvar "HPNAME" HatchName)
   (princ (strcat "\nHatch pattern '"
    HatchName
    "' is ready to use!"
   )
   )
 )
 (progn
   (princ "\nUnable to create hatch pattern file:")
   (princ (strcat "\n  " FileName))
 )
      )
    )
    (princ
      (if FileLines
 "\nCancelled."
 "\nUnable to create hatch pattern from selected entities."
      )
    )
 )
 (princ)
)

(princ "\n ************************************************************** ")
(princ "\n**                                                            **")
(princ "\n*  HatchMaker.lsp written by Lanny Schiele -- enjoy!           *")
(princ "\n*                                                              *")
(princ "\n*  Type in DRAWHATCH to have the environment created to draw.  *")
(princ "\n*  Type in SAVEHATCH to save the pattern you created.          *")
(princ "\n**                                                            **")
(princ "\n ************************************************************** ")
(princ)

[(gile)]

Salut,

 

Un recherche avec c:drawhatch t'aurait fait trouver cette réponse.

[nen]

Salut Gile,

 

Je te remercie pour ton aide, toujours aussi efficace le forum

J'avais fait une recherche mais pas avec "drawhatch" :)

 

Super merci

A bientôt